Comparing stick built versus unitized systems for metal curtain wall installation

Outside walls matter when you’re putting up a skyscraper or a shopping center. These walls are known as metal curtain wall, which provide both protection from the weather and a nice facade. Two primary methods are used to construct these walls: stick-built systems, and unitized systems. A leader in the industrial manufacturing, Chooshine services both. Knowing the differences can guide you in making decisions for your project. Now, let’s discuss how to decide which route makes the most sense and compare costs. 

Stick Built vs. Unitized Systems: What Shall I Choose for My Next Project? 

The options between stick-built and unitized systems can be confusing. Consider the footprint and profile of your building. If it’s a large, complex building, unitized systems may be preferable. These systems are pre-assembled as large panels. Less work has to be done on site. But if your building is smaller or has irregular shapes, stick-built could be the better option. In stick-built systems, workers assemble walls on-site one piece at a time. This may increase flexibility. You can adjust, but that means more work and time. Also, consider your timeline. If you need to end very rapidly, unitized systems may be faster because they come pre-assembled. But, if your project is also flexible with the schedule stick-built could be a good option as well. The weather is another point to consider. If you live in a wet area, that might be better because the unitized systems can go up faster and keep the inside dry. Stick-built systems are likely to take longer and may be subject to bad weather. Finally, inquire about your team’s trek. Some are better at one than the other. Their knowledge can make or break your project. Chooshine can advise you during your decision, offering the benefit of our expertise so that you receive the best system to suit your own requirements. 

How Do the Costs of Installing Stick Built vs. Unitized Metal Curtain Walls Stack Up? 

Considering costs, stick-built and unitized may be totally different. Stick-built system is frequently much cheaper at the beginning. Not simply due to the fact that the ingredients are also usually cheaper, but it is also possible to purchase fewer. But in the long run it might get more. This is due to the labor cost to be incurred in the process of building the walls brick by brick because it takes more man hours and employees. It may contribute significantly to the overall expenditure in case your project is long. Conversely, unitized systems are relatively expensive to source. The panels too are produced out in factories and therefore you are paying that too. But, they can be worth it. They might be more costly in the short run, but they might compensate themselves in terms of labor costs. Less time on-site will mean less number of workers, thereby reducing cost in general. And unitized systems are more likely to have fewer errors since construction is carried out under a controlled environment. This would save even a greater amount in the long run. The overall cost is one of the key factors to be put into consideration rather than the initial cost. Chooshine can help you to understand more about these costs and make a well-informed decision to your project. 

Optimizing Efficiency with Unitized Metal Curtain Wall Systems? 

When building a large building with several stories, people tend to put a metal curtain wall systems on it so that it can appear strong and beautiful. These walls are put up in two main ways, that is, in stick-built and in unitized ways. Unitized systems are becoming increasingly popular because they are able to time and energy saving. In order to maximize these unitized systems, it is good to understand the way they work. To start with, there are big panels in unitized systems which are manufactured in a factory. In other words, panels come on site of a building when they are prepared to install quite fast. Our company Chooshine only tries its best in making sure that these panels are made of materials and detail. Constructed in the factory, they are far less prone to making mistakes as when constructed on-site. This will reduce the number of delays and enable the project to remain on schedule. 

Another tool of increasing efficiency is through the application of team-work. Unitized systems enable workers to build faster than the panels can be built in stick-built systems because workers have to build each piece separately. This will enable it to be constructed more quickly and possibly at lower expense. Chooshine encourages proper communication between all stakeholders; factory and builder. It can be useful to consider the issues before they arise with proper planning and cooperation to find solutions in the quickest possible manner. Good cooperation to ensure that the panels will fit perfectly when they are put down. 

Lastly, unitized systems imply a reduced level of waste. In a stick-built structure, small pieces are dusted and shaped on the ground and materials are left behind. However, in unitized systems, a majority of cutting and shaping is done at the factory and as a result, there is reduced wastage. Not only does that benefit the environment, it also assists in the smoother going of the work in the project. In summary: Be the best in quality production, collaborative contribution and removal of waste to achieve performance in unitized metal curtain wall projects. Unitized solutions are all that concerns the provision of the best to your building project. 

What Are The Advantages Of Buying Metal Curtain Wall Systems Wholesale? 

Having mentioned the purchase of metal curtain wall systems, there are numerous reasons as to why you should buy in quantity, or that is, in large quantities. Firstly, larger quantities of purchase often cost a fraction of the price. This is good to the builders and firms such as Chooshine since it will help them save money. Having extra savings, the builders will either reinvest the extra cash in other areas of a project or invest it in superior material. In other words, they do not only get a better product, but also are able to transfer a second rate to their customers. 

The other significant benefit of purchasing in bulk is the fact that you can purchase all the materials that you require to formulate your intended project in a single location. Builders can purchase in bulk hence ordering everything they need at a time. This reduces delay risks in situations whereby parts are slow to deliver. Chooshine makes sure that when you place an order in bulk, it is timely delivered and shipped. Having everything on hand, the builders can focus on the installation without distractions of any kind. This leads to expedited project completion. 

Another way that buying in bulk will enhance an appropriate relationship between builders and suppliers is by developing a more appropriate relationship. Builders can also build trust and communication by the same suppliers. Chooshine emphasized on good relationship with our clients and partners. This is because whenever there arise some issues, they will be dealt with immediately. The suppliers will also tend to do extra work to a usual client who orders metal curtain walls in bulk and this could translate to customer service. Overall, wholesale purchase of metal curtain wall systems will save money, provide deliveries in time and establish more favorable relations with the manufacturers. Saying, at Chooshines we exist to assist builders in making the right decisions. 

What Impact Do Weather Conditions Have on Stick Built or Unitized Metal Curtain Wall Installation? 

Weather may have disproportionate impact in installation of metal handicraft items whether in stick built, or unitized. When it is rainy or windy, it is hard to exercise outside. This may be very hard on stick-built systems. The laborers have to put together numerous small components at the construction place. When it is raining, then everything may be wet and slippery and dangerous. Then, of course, rain and water will simply ruin the materials, so they perhaps will have to be changed. This leads to time wastage and other expenses. There is a major advantage to unitized systems though. They are also less responsive to the weather effects of aging due to their manufacture in a factor. As soon as they get to the field, they can be set up within a short period of time despite the weather not being favorable. 

Installations are also influenced by weather in terms of temperatures. High temperature or low temperature may interfere with the work of workers. Under the stick-built system, employees might be forced to stop or reduce work during the heat hours before they are required to take a break. You may have unitized systems as well! And since they are very big panels, workers will have an opportunity to install them faster and complete the task before the weather alters. Chooshine is aware of the need to be prepared against all kinds of weather. Our unitized systems are designed to be resistant in hard shield weather. 

And finally wind may make a large contribution also. It is very risky to work at high winds. Stick-built systems may be challenging to deal with in a windy construction site, as they are put together at a time. The stick-built systems are however, not that stable and can be assembled slower as compared to unitized systems. In such a manner in case there is a storm prior to the day when it can be done, the work is completed quickly and no one gets hurt. installation of Metal Curtain wall can be affected significantly as a byproduct of the weather. It is a safer and faster alternative like the likes of Chooshine unitized systems that do not create delays and complications to the project.